Printek Engineers printgraph
 
 
Intec Print Solutions CP3000

PRINT ENGINE SPECIFICATIONS
 
Print Technology Colour LED
Print Speed (A4 mono): Up to 50ppm
Print Speed (A4 colour): Up to 45ppm
Time to first page (black) As fast as 5.2 seconds
Time to first page (colour) As fast as 7.7 seconds
Print Resolution, Black 2400 Image Quality, 1200 x 1200 dpi
Print Resolution, Colour 2400 Image Quality, 1200 x 1200 dpi
Memory, Standard 1GB
Memory, Maximum 2GB
Hard Disk Drive SFP (optional) PRO as Standard
Print Noise Level, Operating 52 dBA
Maximum Monthly Duty Cycle: Up to 225,000 pages maximum capacity expected in any one month. This is not expected to be sustained on a regular basis.
 
COPY FAX SCAN (ONLY CP3000 PRO MODEL)
   
Copying 50cpm black, 45cpm colour, reduce/enlarge 25%-400%
   
Scanning RADF (reverse duplex) optical resolution 600x600 ppi colour, 1200x600 ppi mono, route scanned images to up to 30 pre-defined network destination
   
Faxing 33.6Kbps
 
 
PAPER HANDLING
 
Paper Handling Standard 500 Sheet Output Bin, Integrated Duplex, 100 Sheet Multipurpose Feeder, 520 Sheet Input Tray
Paper Handling Optional 1x520 Sheet Drawer Stand, 3x50 Sheet Drawer Stand, Finishing System
Paper Input Capacity, Standard: Up to 620 pages of 75gsm/micron
Paper Input Capacity, Maximum: Up to 2180 of 75gsm/micron
ADF Paper Input Up to 110 pages 75gsmmcron
Media Types Supported Bond, Cover stock, Card Stock, Envelopes, Glossy Paper, Labels, Plain Paper Transparencies, Refer to the Card Stock & Label Guide
   
CONSUMABLES  
Toner Cartridge:(Black) 32,000* (Part number:CP30004) Toner Cartridge:(CMY), 22,000* Cyan (Part number:CP30005), Magenta (Part number:CP30006, Yellow (Part number: CP30007) Photoconductor: (Black) 115,000 (Part number:CP30010), Colour Photoconductor kit (CMY) (Part number CP30009) Waste toner bottle: 30,000 (Part number: CP30008) Fuser Unit (220V): 320,000 (Part number: CP340X6629)
*Average continuous black or continuous composite CMY declared cartridge yield up to this number of standard pages in accordance with ISOIEC 19798
 
FINISHING UNIT SUPPLIES  
Staples Staple Cartridge 3 x 5,000 – total 15,000 (Part number: CP30018), Saddle Staple Cartridge 4 x 5,000 – total 20,000 (Part number CP30019)
 
     
 
GENERAL
   
Function (SFP) Network Printer
Function (PRO) Network Scanning, Scanning, Copying, Faxing, Printing
Product Guarantee
Size (H x W x D)
1 Year limited
(SFP) 565 x 640 x 685mm (PRO) 762 x 640 x 685mm
Weights (SFP) 95kg (PRO) 116kg 520 Sheet  Input Drawer Stand 26.5kg 3 x 520 Sheet Input Drawer Stand 34.7kg Finishing Unit 43.6kg Fiery XF for Intec RIP 38.9kg
Specified Operating Environment Humidity: 15 to 85% Relative Humidity Temperature: (10˚C to 32˚C). Altitude: 0-2,300 metres.
 
       
   
   
  © 2013-18 Printek Engineers. All Rights Reserved.